Tems Investigation 21.2

Infovista released the latest update to the Tems Investigation software.

Tems Investigation 21.2

Tems Investigation 21.2

New Devices added:

 

ZTE Axon Pro 10

The ZTE Axon Pro 10 is a combined 4G/5G Android device based on the Qualcomm SnapDragon 855 chipset and the Snapdragon X50 5G modem.

It can connect to 5G networks, and capable of LTE 4×4 MIMO. It is introduced as a connectable device with TEMS Investigation

New Features

Test high data speeds in 5G NR networks with commercial devices

To enable high-speed data testing with a wide range of 5G devices including routers and devices based on various chipsets, on-device data services (HTTP, FTP, Ping, Iperf) can now be installed and run on all connectable Android devices.

This opens for, among other things, throughput testing of high data speeds in 5G NR networks with commercial off the shelf devices with TEMS Investigation 21.2 or later.

In previous versions of TEMS Investigation, a separate license was required for this functionality, from now, it is included in the base license.

Added 5G NR Information Elements and Events

Support for the following Information Elements and Events has been added to TEMS Investigation.

•PUSCH Resource Block Allocation Count

•PDSCH Resource Block Allocation Count

•Bandwidth Part ID Downlink

•Bandwidth Part Center NR-ARFCN Downlink

•Bandwidth Parts Configured Count Downlink

•Bandwidth Part ID Uplink

•Bandwidth Part Center NR-ARFCN Uplink

•Bandwidth Parts Configured Count Uplink

•Bandwidth Part Downlink Changed

•Bandwidth Part Uplink Changed

•Bandwidth Part Bandwidth Downlink

•Bandwidth Part Bandwidth Uplink

•Bandwidth Part SCS Downlink

•Bandwidth Part SCS Uplink

•Cyclic Prefix Downlink

•Cyclic Prefix Uplink

Control desired voice call type

With this release of TEMS Investigation, users are able to select which technology to use when performing voice calls. VoLTE or VoWiFi can be set as preferred type.

Scanning improvements

• Support for NR Signal Scan on mmWave with downconverter using the Rodhe & Schwarz TSME6.

•Added Wideband RSRP Signal Scan mode for Rodhe & Schwarz TSME6

.• NR Signal Scan with L3 support using PCTEL HBflex, IBflex, or MXflex scanners

.•Support for LTE-LAA scanning using PCTEL scanners

.•Added support for LTE Band 46, 47, 48.

•MCC and MNC information elements added when doing Blind Scan on LTE, WCDMA, or GSM.

 

More information can be found at:  Infovista